What can be worse than cold air blowing out of your furnace on a freezing winter day? When your furnace isn’t working properly, you might experience chilly air or issues coming from the flame detector, gas supply, air filter, pilot light, or condensate lines. Most of these problems can be resolved by cleaning or replacing parts of the gas furnace on your own.
1. Filters clogged with debris
Dirty air filters are commonly indicated by prolonged heat cycles and overheating concerns. When your heater overheats, it pumps cool air throughout your home.
Replacing a disposable filter is a good idea.
However, cleaning a permanent filter is an alternative. To reestablish the circulation of warm air in your home, replace the dirty air filter with a clean one.
2. Blockage in the condensate line
Clogged condensate pipes might cause the burners to become inactive, resulting in cold air being vented into your home. There are times when condensed liquid clogs the condensate line, but not always. Have a heating and air conditioning professional clean the condensate pipe. Look for a specialist for furnace repair in Lawrenceville.
3. Inadequate gas supply
The gas furnace needs a sufficient amount of natural gas to function properly. A clogged pipe may be preventing gas from flowing. Therefore, you should seek out furnace repair in Lawrenceville from a specialist.
4. Controlling the thermostat
There’s a possibility that the battery has run out. Another reason could be that it isn’t compatible with your device, in which case, you might need a professional’s help to fix it. You can replace the battery or look for Lawrenceville furnace repair.
5. Pilot light
There are two possible causes for your pilot light going out. You must have just blown out the flame, or it was never lit properly from the beginning. It could be caused by a blockage from dirt and soot or a broken thermocouple. Even if you light it yourself, if it doesn’t work, you should consider getting a furnace replacement in Lawrenceville, GA.
6. Defects in the ductwork
The furnace may vent cold air because of gaps and breaches in the home’s ductwork. Your furnace’s ductwork may be infiltrated with cold air from the attic through the small to large gaps. Warm air may be blowing out of your furnace and may be functioning well, but when it reaches your vents, it may have leaked out. Check if the ducts are sealed properly.
7. Flame detector
Dust and grime covering the flame detector will cause you to lose all your heart, and the furnace will begin blowing cold air. Get the flame detector cleaned. The flame detector can be cleaned by a professional if you cannot do it yourself.
Faith Mechanical LLC provides the best and affordable furnace repair in Lawrenceville. When it comes to quality furnace tune-ups and furnace repairs, look no further than Faith Mechanical in Lawrenceville. You can give us a call at (678) 889-2333.
Air conditioning units are designed to work continuously for a long time. Frequent maintenance and air…
Many people believe they can use the AC non stop at any desirable time and…
To live comfortably, your home must have a pleasant atmosphere. Air conditioning and heating are…
One must ensure that an air conditioning system is well serviced before turning it back…
Many homeowners rely on an air conditioner for home comfort, and if it emits an…
Having air conditioning in your home is the ultimate luxury, especially during hot summer days.…